CURT 11352 Class 1 Trailer Hitch; 1-1/4-Inch Receiver; Select Nissan Altima; Maxima
However you define adventure -- whether its climbing onto the back of a mountain bike, hunting from the top of a tree stand or camping with the family a long way from nowhere -- CURT class 1 hitches provide a light-duty towing receiver to help you Bring It. Each is made to fit a specific vehicle, providing easier installation, a better fit and optimal towing capacity. Custom class 1 trailer hitches are available for a variety of smaller vehicle types, including the compact car, crossover, minivan and small SUV. This particular class 1 hitch is designed to be a custom hitch for certain years of the Nissan Altima and Maxima (to verify vehicle compatibility, see the CURT application guide at Tested in accordance with SAE J684, it offers a weight carrying capacity of 2,000 lbs. GTW and 200 lbs. TW. It is equipped with 1-1/4" receiver tube opening to accept a ball mount shank or other hitch mount. This class 1 hitch also comes with all necessary mounting hardware. With its lightweight design and smaller receiver tube size, a class 1 hitch is especially useful for adding cargo space with a hitch-mounted bike rack or cargo carrier. They can also typically be used to tow small trailers such as a utility trailer, kayak trailer or teardrop camper (never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc.). Though CURT class 1 trailer hitches are only intended for light-duty towing, we apply the same principles of quality as we do to the rest of our rear mount hitches. Each class 1 hitch is made with hands-on engineering, high-strength steel and precise welding. We use a co-cured finish of liquid Bonderite, inside and out, and durable black powder coat to provide a lasting defense against rust, chips and UV rays.
  • Made w/A Vehicle-Specific Design For A Custom Fit
  • Tested For Safety In Accordance w/SAE J684
  • Precisely Welded For Superior Strength And Fit
  • Protected By A Durable High-Gloss Black Powder Coat Finish
  • Co-Cured In A Rust-Resistant Liquid Bonderite Coating
  • Strengthened w/A Cast Welded Seamless Collar
  • Equipped w/An Open-Back Receiver For Easy Cleaning
  • Backed By A Limited Lifetime Warranty
  • Made in USA [may include imported hardware]

Application Summary:

Year Make/Model
2007-2020 Nissan Altima
2009-2020 Nissan Maxima
Body Shape Square
Box Height in Inches - XA 10
Box Length in Inches - XA 44
Box Width in Inches - XA 19
California Proposition 65 No
Class ID 1
Country of Origin (Primary) US
Drilling Required Yes
Emission Code Legal US
Finish Gloss Black Powder Coat
GTIN 00612314009176
Gross Trailer Weight 2000 lbs.
Gross Trailer Weight (lbs.) 2000
Harmonized Tariff Code (Schedule B) 8708998180
Hazardous Material Code N
Install Time 45 Minutes
Item Class - XA MFH
Item Height - XA 7.790
Item Length - XA 40.625
Item Width - XA 20.880
Life Cycle Status Code Available to Order
Long Description Class I Trailer Hitch, Pin & Clip, No Ball Mount
Main Body Shape Square
NAFTA Preference Criterion Code B
Parcel Allowed - XA Yes
Position Rear
Product Weight - XA 30.000
Rate Class - XA 70.0
Receiver Tube Size 1.250 in.
Retail Height - XA 12.000
Retail Length - XA 45.000
Retail Width - XA 21.000
SDR Required Flag N
Shipping Weight - XA 37.000
Tariff 301 - XA No
Tongue Weight (TW) 200 LB
Tongue Weight(TW) 200 LB
Visibility Exposed
WARNING CA Proposition 65 No
WC Tongue Weight 200
Warranty Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
Weight Carrying Capacity 2000
Weight Carrying Capacity (WC) 2,000 LB
Weight Carrying Capacity(WC) 2,000 LB
Weight Distribution (WD) n/a
Weight Distribution Tongue Weight (WDTW) n/a
Weight Distribution Tongue Weight(WDTW) n/a
Weight Distribution(WD) n/a

Write a review.

Note: HTML is not translated.
    Bad           Good

CURT 11352 Class 1 Trailer Hitch with 1-1/4" Receiver

Product Information

  • Brand: CURT
  • Product Number: 11352
  • $164.83